Xtreme-Grip™ Torque Arm System 1979-2004 Mustang 8.8 Non-IRS


SKU: CTA-20-1000


Xtreme-Grip Torque Arm suspension upgrade is optimized to deliver greater corner exit and straight-line grip without sacrificing cornering ability.


  • Bolt-On DIY Ease
  • Eliminate factory upper 3rd link
  • Reduce noise

The CorteX design also provides ample driveshaft clearance for most 1-piece driveshaft.

Options * 


Xtreme-Grip Torque Arm System


Vehicles: 1979-2004 Mustang, 8.8 Non-IRS

Unsurpassed Cornering

Deliver unmatched corner exit and straight-line rear grip without sacrificing cornering ability. You can also expect a significant decrease in front end dive under braking since the rear axle rotational loads are now applied much closer the center of gravity.

Optimized Design

These improvements are accomplished by changing the anti-squat and anti-lift geometry of the rear suspension. When a mustang is lowered from the factory ride height the rear suspension geometry is compromised reducing rear grip under acceleration. Relocating the lower control arms pivots on the axle is a step in the right direction, however more improvement is possible.

Our torque arm system allows significantly more anti-squat to be added to your mustang than with a 3 or 4 link design while still having correct rear axle roll steer. With our torque arm the rear tires are loaded more evenly than a 3-link design further maximizing traction. The more power your vehicle has the more benefit you will gain by installing our torque arm system.

Note:  If you are not buying the Xtreme-Grip watts link system along with the torque arm you will also need to purchase a Super Low Profile TA Performance rear end differential cover in order to install the torque arm.

Additional information

Weight 45 lbs
Dimensions 52 × 12 × 12 in


There are no reviews yet.

Be the first to review “Xtreme-Grip™ Torque Arm System 1979-2004 Mustang 8.8 Non-IRS”